Guide to Stick Welding
Stick welding, also known as Shielded Metal Arc Welding (SMAW), is one of the most widely used welding processes. This versatile method is known for its simplicity, portability, and effectiveness in joining various types of metals. In this blog, we will cover everything you need to know about stick welding, including how to weld with a stick welder, what stick welding is, and practical tips for achieving the best results.
What is Stick Welding?
Stick welding, or Shielded Metal Arc Welding (SMAW), is a manual arc welding process that uses a consumable electrode coated in flux to lay the weld. An electric current is used to create an arc between the electrode and the metals to be joined.
During stick welding, the heat generated by the electric arc melts both the base metal and the electrode. The flux coating on the electrode vaporizes, creating a shielding gas and slag that protect the weld pool from atmospheric contamination. This shielding prevents oxidation and ensures a strong, clean weld.
What is Stick Welding Called?
Stick welding is also referred to as Shielded Metal Arc Welding (SMAW). The term "stick welding" comes from the use of a stick-like electrode.
How to Stick Weld:
Equipment Needed:
- Stick welder (SMAW machine)
- Welding electrodes (e.g., E6010, E6011, E6013, E7018)
- Welding helmet and protective gear (gloves, jacket)
- Ground clamp and welding cables
- Chipping hammer and wire brush
Steps:
- Prepare the Workspace:
- Safety First: Ensure proper ventilation to avoid inhaling harmful fumes. Wear appropriate personal protective equipment (PPE), including a welding helmet, gloves, and a fire-resistant jacket.
- Set Up a Clean Area: Ensure your work area is free from flammable materials and well-organized.
- Choose the Right Electrode:
- Electrode Selection: Select the appropriate electrode for your metal type and welding position. Common electrodes include E6010 for deep penetration, E6011 for dirty or rusty metals, E6013 for light fabrication, and E7018 for structural work.
- Set Up the Welder:
- Connect Components: Attach the ground clamp to the workpiece. Insert the electrode into the electrode holder, ensuring a secure fit.
- Adjust Settings: Set the welder's amperage based on the electrode type and material thickness. Refer to the electrode manufacturer's recommendations for guidance.
- Clean the Metal Surface:
- Remove Contaminants: Use a wire brush or grinder to remove rust, paint, and other contaminants from the welding area. Clean metal ensures better weld quality and reduces the risk of defects.
- Strike the Arc:
- Arc Creation: Touch the electrode to the workpiece to create a spark, then quickly lift it slightly to establish the arc. Practice on scrap metal if you are new to welding to get comfortable with striking an arc.
- Maintain the Arc:
- Arc Length: Keep a consistent arc length, roughly equal to the diameter of the electrode. Too short an arc can cause the electrode to stick, while too long an arc can lead to a weak, spattering weld.
- Create the Weld Bead:
- Steady Movement: Move the electrode steadily along the joint, creating a weld bead. Use a weaving or circular motion for wider beads to ensure even distribution of the weld metal.
- Finish the Weld:
- Slag Removal: Once the weld is complete, allow it to cool slightly. Remove the slag with a chipping hammer and clean the weld with a wire brush to reveal the finished weld.
How to Weld with a Stick Welder:
Welding with a stick welder involves several key steps to ensure a strong and clean weld. Here’s a more detailed approach:
- Select the Electrode: Choose an electrode suitable for the material you are welding. For example, E6011 is versatile and good for dirty or rusty metals, while E7018 provides strong, clean welds for structural work.
- Prepare the Metal: Clean the metal surface thoroughly. Any contaminants like rust, oil, or paint can weaken the weld and lead to defects.
- Set the Amperage: Adjust the welder’s amperage according to the electrode manufacturer’s recommendations. Too low amperage can cause sticking, while too high can lead to excessive spatter and burn-through.
- Strike the Arc: Strike the arc by dragging the electrode across the metal surface like striking a match. Once the arc is established, maintain a steady arc length.
- Travel Speed and Motion: Maintain a consistent travel speed. Use a slight weaving motion or small circles to control the width and shape of the bead.
- Monitor the Weld Pool: Keep an eye on the weld pool to ensure proper fusion between the base metal and the filler metal.
- Finishing: Allow the weld to cool and then remove the slag using a chipping hammer. Clean the weld area with a wire brush to inspect the weld quality.
How do you Stick Weld?
Key Techniques:
- Arc Length: Maintain a consistent arc length. Too short an arc can cause the electrode to stick, and too long can result in a weak, spattering arc.
- Electrode Angle: Hold the electrode at an angle of about 10-15 degrees from vertical, leaning in the direction of travel.
- Travel Speed: Adjust your travel speed to control the bead shape. Too fast can lead to a thin, weak weld, while too slow can cause excessive buildup and potential defects.
- Weaving Patterns: For wider joints, use weaving patterns like a zigzag or circular motion to ensure even distribution of the weld metal.
Practical Tips:
- Practice Striking the Arc: Beginners often find it challenging to strike and maintain an arc. Practice on scrap metal to get comfortable with this process.
- Monitor Electrode Consumption: As the electrode burns, you need to adjust your hand position to maintain a consistent arc length.
- Control Heat Input: Avoid excessive heat, which can warp the metal or cause burn-through, especially on thinner materials.
- Check for Defects: After welding, inspect the weld for common defects such as porosity, cracks, or lack of fusion. Addressing these issues ensures the strength and quality of the weld.
Advanced Techniques in Stick Welding
- Vertical and Overhead Welding: Stick welding can be performed in various positions, including vertical and overhead. Each position requires specific techniques to control the weld pool and prevent defects.
- Multi-Pass Welding: For thicker materials, multiple passes may be needed. Clean the weld bead between passes to remove slag and ensure proper fusion.
- Welding Dissimilar Metals: Stick welding can be used to join different types of metals, but it requires careful selection of electrodes and welding parameters to achieve a strong bond.
Conclusion
Stick welding, or Shielded Metal Arc Welding (SMAW), is a versatile and widely used welding process. By understanding the basics of how to stick weld, selecting the right equipment, and following proper techniques, you can achieve strong, reliable welds. Whether you are a beginner or an experienced welder, mastering stick welding opens up numerous opportunities in various industries, from construction to repair and maintenance. Happy welding!